get in touch
get in touch

Request a Quote

+46 (0)586 771 270

Latest news

Outlining Requirements for a Mobile Explosive Containment Vessel
Released in: 2019:04:25
Dynasafe announces the launch of its Dynalockr F7 and F10 explosive storage chambers


Released in: 2019:04:16

Learn more

DynaSEALR X-series Overview Guide


Dynasafe Protection Systems AB is certified according to ISO 9001:2008


Radiation protected DynaSEALR X10r-HTR mounted on trailer

With the radiation-shielded DynaSEALR X10r mounted on a trailer, you get a mobile system with high explosion and CBRN agent containment capacity. The vessel will totally contain and protect against the effects from explosions, such as shock wave, light fragments and toxic material like chemical and biological agents. In addition, the 30 mm lead shielding protects against 'dirty bombs'.


Once a suspected toxic or explosive device is detected, it is loaded into the DynaSEALR X10r, thus securing the surrounding area. Now you can safely remove the object to a place where it can be investigated and evidence can be secured by EOD specialists in a manner that does not constitute a threat to public security.

Load large objects easily thanks to the wide opening and the possibility to rotate the cover with the loading tray up to 270°. Opening and closing of the vessel is remotely operated via a 50 m long cable.

Contained gases can be kept inside until they are released through a valve system. Dynasafe can offer equipment to take air samples out of the closed and gas-tight vessel, in order to determine if toxic gases are enclosed inside, as well as equipment to clean contained gases and decontaminate the chamber.

The trailer is a double axle purpose-built heavy trailer that can be towed by a SUV, station wagon or similar vehicle.




Note: The pictures are illustrative examples. Your DynaSEALR-product may look different. All technical data is indicative only. Contact us for further information.

Product data: 

Available options (not included in the standard version)


  • Robot buttons for alternative opening/closing by robot.
  • Remote controlled manipulator arm for loading and unloading.
  • Fragment shield to protect against fragmentation bombs.
  • Separate gas sampling equipment to take air samples out of the closed DynaSEALR.
  • Wireless (radio remote) control of opening and closing of the vessel as well as pressurising and decompressing of the seals.
  • Heating system, capable of heating the loading tray to approximately 350°C. This will cause explosives to burn, deflagrate or detonate.
  • Decontamination equipment on a separate trailer, to treat contamination inside the closed vessel.
Table field: 
Rated explosion capacity5 kg TNTeqEquals 11 lb
Total weight~7600 kgEquals 16760 lb
Width (excl trailer, i.e. on frame)~1300 mmEquals 51.2 inch
Height (excl trailer, i.e. on frame)~1650 mmEquals 65 inch
Length, closed (excl trailer, i.e. on frame)~2030 mmEquals 80 inch
Length, open (excl trailer, i.e. on frame)~2700 mmEquals 106.3 inch
Maximum size of loaded object (LxWxH)700x500x450 mmEquals 27.6x19.7x17.7 inch
Product sheet

Enter information or login to download

DynaSEALR X10r-HTR, US version