get in touch
get in touch

Request a Quote

+46 (0)586 771 270

Latest news

Outlining Requirements for a Mobile Explosive Containment Vessel
Released in: 2019:04:25
Dynasafe announces the launch of its Dynalockr F7 and F10 explosive storage chambers


Released in: 2019:04:16

Learn more

DynaSEALR X-series Overview Guide


Dynasafe Protection Systems AB is certified according to ISO 9001:2008


Loaded DynaSEALR X12-HTR

With the DynaSEALR X12 mounted on a trailer, you get the higher explosion capacity, and larger loading volume, in a mobile system.

The vessel will totally contain and protect against chemical and biological agents as well as the effects from explosions, such as shock wave and light fragments.

Once a suspected toxic or explosive device is detected, it is loaded into the DynaSEALR X12, thus securing the surrounding area. Now you can safely remove the object to a place where it can be investigated and evidence can be secured by EOD specialists in a manner that does not constitute a threat to public security.

Load large objects easily, also with an external robot, thanks to the wide opening and the possibility to rotate the cover with the loading tray up to 270°. Opening and closing of the vessel is remotely operated via a 50 m long cable.

Contained gases can be kept inside until they are released through a valve system. Dynasafe can offer equipment to take air samples out of the closed and gas-tight vessel, in order to determine if toxic gases are enclosed inside, as well as equipment to clean contained gases and decontaminate the chamber.




Note: The picture is an illustrative example. Your trailer-mounted DynaSEALR X12 may look different. All technical data is indicative only. Contact us for further information.

Product data: 

Available options (not included in the standard version)


  • Robot buttons for alternative opening/closing by robot.
  • Remote controlled manipulator arm for loading and unloading.
  • Fragment shield to protect against fragmentation bombs.
  • Separate gas sampling equipment to take air samples out of the closed DynaSEALR.
  • Wireless (radio remote) control of opening and closing of the vessel as well as pressurising and decompressing of the seals.
  • Heating system, capable of heating the loading tray to approximately 350°C. This will cause explosives to burn, deflagrate or detonate.
  • Decontamination equipment on a separate trailer, to treat contamination inside the closed vessel.


Table field: 
Rated explosion capacity8 kg TNTeqEquals 17.6 lb
Weight (excl trailer, i.e. on frame)3900 kgEquals 8600 lb
Width (excl trailer, i.e. on frame)1550 mmEquals 61.0 inch
Height (excl trailer, i.e. on frame)~1700 mmEquals 66.9 inch
Length, closed (excl trailer, i.e. on frame)~2300 mmEquals 90.6 inch
Length, open (excl trailer, i.e. on frame)~3030 mmEquals 119.3 inch
Maximum size of loaded object (LxWxH)900x800x650 mmEquals 35.4x31.5x26.5 inch
Maximum weight of loaded object70 kgEquals 154 lb
Product sheet

Enter information or login to download